Synthetic Finishing Varnishes and Glyptals.
Silicone oven varnish Class F – H
It is composed of synthetic resins modified with silicone resin in order to achieve high thermal resistance at temperatures above 155ºC.
It is impregnated and its preparation time is 3 to 4 hours at 140ºC – 160ºC. Under these conditions, an excellent cementing of bobbins and other insulating components are achieved.
As finishing varnish we recommend our two-component epoxy systems which come in grey, red and black.
Diluent: 180 – 1061
| Specific Gravity (g/cm3) | 1.01 +/- 0.02 |
| Viscosity (Ford Cup 4) | 90 – 120 seg. |
| Solids (%) | 50 +/- 1 |
| Dielectric strength (Kv/mm) | 52 dry – 38 humid |
Polyurethane Enamel
Polyester–isocienate polyurethane enamel, with great UV-stable pigments. It produces high gloss films, great strength, good elasticity and chemical resistance, excellent color and gloss retention in outdoor surfaces.
Technical specifications
|
Type |
Two-component polyester–isocienate(Pigmented base + cross linking agent) |
|
Blending radius |
According to weight: Base 0.910K Cross linking agent 0.350 Kg |
|
Specific gravity |
Base 1.370 Kg/l |
|
Viscosity (Ford Cup 4 25ºC) |
Initial 77” |
|
Solid content |
According to weight 60 + 2% |
|
Setting time (25ºC 50% HRA) |
Touch-dry 3 hours |
|
Pot life |
6 hours at 20ºC |
|
Prereaction time |
20 minutes |
|
Application temperature |
15ºC to 35ºC |
|
Service temperature |
80ºC maximum, continuous |
|
Color |
See color catalogue |
|
Gloss |
High gloss |
|
Stability in container |
1 year |
|
Theoretical performance |
10m2/litre for 40 µ. of dry film |
|
Recommended base |
EPO – LUX line bases |
|
Diluent |
Reducer 180-1024 |
|
Units |
1 litre |
“IMAVOLT” insulating barniz characteristics and properties
| Code | Type | Diluent | Specific gravity at 25ºC | Viscosity Ford Cup 4 at 25ºC (sec) | Dielectric strength (IRAM 2070 V/0.01mm) | Drying at 25ºC | Insulation class | Adhesion | Resistance to | |||
| Dry | Humid | Water | Oil | Dilute acids | ||||||||
| B-1160 | Synthetic air-dried | S-2000 | 0.90 +- 0.02 | 40-50 | 950 | 710 | Hard 3-4 hs | E | Very good | Good | Very good | Good |
|
B-1161 B-1162 B-1163 B-1164 |
Finishing Glyptal Red Ocher Gray Black |
S-2000 | 0.93 +- 0.02 |
25-35 40-50 60-70 30-40 |
– | – |
Air-dried: Hard 3-4hs Oven-dried: 40 min at 90ºC |
E | Very good | Good | Very good | Good |
| E-2160 | Synthetic ultrarapid air-dried | S-3000 | 0.90 +- 0.02 | 15-25 | 870 | 630 |
tack-free 20m hard 1 hour |
E | Very good | Very good | Good | Very good |
| B-2230 | Synthetic oven-dried | S-4000 | 0.90 +- 0.02 | 20-30 | 980 | 700 | 1 1/2 – 2 1/2hs at 120º -130ºC | B | Very good | Very good | Very good | Very good |
| E-2231 | High revolution rotor oven | S-4000 | 0.90 +- 0.02 | 25-35 | 1600 | 1250 | 2 1/2 -3 1/2hs at 130ºC | B-F | Very good | Excellent | Very good | Very good |
| E-180-1058 | Epoxy-phenol for aluminum | S-5000 | 0.90 +- 0.02 | 25-35 | 2000 | 1400 |
1hour at 150ºC 2-3hs at 140ºC |
F | Very good | Excellent | Very good | Very good |
| R-3040 | Polyester for potting | S-7000 | 1.10 +- 0.02 | more than 120 | 1300 | 1100 | 40m at 25ºC | B | Very good | Very good | Very good | Good |
| R-3060 | Polyester for potting | S-7000 | 1.10 +- 0.02 | more than 120 | 1700 | 1470 | 1 1/2 – 2 1/2hs at 125º -140ºC | B | Very good | Very good | Very good | Good |
| E-180-1061 | Silicone polyester oven | S-9000 | 1.10 +- 0.02 | 100-120 | 2000 | 1700 | 4 hours at 140ºC | F-H | Excellent | Excellent | Very good | Excellent |
| E-180-1068 | Modified Epoxy | 369-287 | 1.10+-0.02 | 50 | 1700 | 1400 | 4 hours at 140ºC | F | Excellent | Very good | Very good | Very good |